 |
126NH
 360 Amps @ +24VDC
40/60 Amp Switchmode Rectifiers
BTCM
PDF Product Information Sheet
|
|
 |
127NHL
60 Amps @ -48VDC
Low Profile Design
BTCM
PDF Product Information Sheet
|
| The PEC 126NH plant is a modular designed, microprocessor-controlled rectifier plant capable of providing various outputs dependent on the input AC and the number of rectifier modules installed. This 23" plant can accommodate up to six rectifier modules for an output ranging from 40 Amps (120VAC input) to 60 Amps (240VAC input) per rectifier module at +24VDC. Total plant rating is up to 360 Amps when equipped with six rectifier modules and an input of 240VAC. |
|
The space saving 127NHL power system provides a regulated output of -48VDC @ 60 Amps when supplied with an input of 240VAC, or provides an output of 40 Amps when 120VAC is used. The low-profile plant accommodates two switchmode rectifier modules, six distribution positions (up to 30A each), alarming, and user-friendly controls. If redundant operation is desired, the 127NHL will automatically operate using one rectifier to assume the 20/30 Amp load.
|
 |
127NHV
360 Amps @ -48 VDC
20/30 Amp Switchmode Rectifiers
Front Access
PDF Product Information Sheet
|
|
 |
127NM
21 Amps @ -48VDC
3 Amp Switchmode
Rectifiers
BTCM
PDF Product Information Sheet
|
| The front access 127NHV modular-designed power system supplies 20 to 360 Amps of –48VDC in increments of 30 Amp rectifier modules (20 Amp output with a 120VAC input). The system accommodates one or two rectifier shelves and a single external distribution that has provisions for 16 plug-in circuit breakers or TPC, TPW, or TPL fuses. Also included are ten GMT fuse positions. Optional LVD (Load Disconnect) or LVBD (Battery Disconnect) are available. |
|
The 127NM, 3 to 21 Amp at -48VDC power system operates from a 115 or 220VAC, 50 to 60 Hz source. The system utilizes switchmode rectifiers to expand the output in 3 Amp increments. The power system provides output distribution, low voltage disconnect, and alarming. The 127NM power system is available in 19" and 23" rack or wall mount configurations. The 19" can accommodate five rectifier modules and the 23" can accommodate seven. |
 |
128
Versatile, Low Profile Design
More room for other equipment
Full Monitoring and Alarm
PDF Product Information Sheet
|
|
 |
129
400 Amps, -48VDC
50 Amp Rectifiers
Fuse or Circuit Breaker Distribution
PDF Product Information Sheet
|
| The 128 Power and Distribution system offers up to 160 Amps of +24VDC power in a compact, low profile design. Power, distribution, alarms, and monitoring are all contained within 7 inches of rack space, making this system ideal for applications where revenue-generating space is critical. The 40 Amp switchmode rectifiers used in the 128 are completely plug-and-play, and can be added to the system without interrupting it’s operation. Distribution consists of four plug-in positions, which can be used for circuit breakers or fuses. |
|
The 129 power system supplies 50 to 400 Amps of –48VDC power in increments of 50 Amp rectifier modules in a compact design. The load distribution may be segregated into three sections (A, B & C) with individual disconnects to provide load shedding and extend the reserve time of most critical loads. The distribution and control assembly provides plant metering, alarms, status indicators and 400 Amp internal bus work. The distribution can be equipped with one to three load disconnects. |
 |
5010c-5010d
150/300 Amps @ -48VDC
1 or 2 Rectifier Shelves
50A Rectifiers
PDF Product Information Sheet
|
|
 |
5010-62
100 Amp @ -48VDC
50 Amp Switchmode Rectifiers
Distribution & Alarm Panel
PDF Product Information Sheet
|
| The 5010c and 5010d modular rectifier systems provide up to 150 Amps (1 rectifier shelf ) or 300 Amps (2 rectifier shelves) at - 48VDC. They operate from a 220VAC input, and utilize A & B output distribution via the distribution circuit breakers on the standard distribution and alarm panel. Power is generated by 50 Amp, switchmode rectifiers. The system can be operated with or without batteries and comes with output voltage adjustment on the rectifier modules (float and equalize), low voltage disconnect and pick up (LVD and LVPU), HV and LV adjust, battery disconnect, and alarm capabilities via the DC distribution and alarm panel. |
|
The 5010-62 modular rectifier system provides up to 100 Amps of power at -48VDC. The current is provided by two 50 Amp, switchmode rectifiers. The system operates from a 220VAC input, and utilizes four circuit breakers for distribution. These are found on the front of the standard alarm panel that contains LEDs for visual notification of alarms and system status. The 5010-62 can be operated with or without batteries and comes with output voltage adjustment on the rectifier modules (float and equalize), low voltage disconnect and pick up (LVD and LVPU), HV and LV adjust, and battery disconnect capabilities. |
|
|
|
|
|
